How To Install openocd on Kali Linux
Introduction
In this tutorial we learn how to install openocd on Kali Linux.
What is openocd
openocd is:
OpenOCD aims to provide debugging, in-system programming and boundary-scan testing for embedded target devices.
The debugger uses an IEEE 1149-1 compliant JTAG TAP bus master to access on-chip debug functionality available on ARM based microcontrollers or system-on-chip solutions. For MIPS systems the EJTAG interface is supported. Additionally there is support for eSi-RISC, Intel, OpenRISC, RISC-V and ARC controllers.
User interaction is realized through a telnet command line interface, a gdb (the GNU debugger) remote protocol server, and a simplified RPC connection that can be used to interface with OpenOCD’s Jim Tcl engine.
OpenOCD supports many different types of JTAG interfaces/programmers.
There are three methods to install openocd on Kali Linux. We can use apt-get, apt and aptitude. In the following sections we will describe each method. You can choose one of them.
Install openocd Using apt-get
Update apt database with apt-get using the following command.
sudo apt-get updateAfter updating apt database, We can install openocd using apt-get by running the following command:
sudo apt-get -y install openocdInstall openocd Using apt
Update apt database with apt using the following command.
sudo apt updateAfter updating apt database, We can install openocd using apt by running the following command:
sudo apt -y install openocdInstall openocd Using aptitude
If you want to follow this method, you might need to install aptitude on Kali Linux first since aptitude is usually not installed by default on Kali Linux. Update apt database with aptitude using the following command.
sudo aptitude updateAfter updating apt database, We can install openocd using aptitude by running the following command:
sudo aptitude -y install openocdHow To Uninstall openocd on Kali Linux
To uninstall only the openocd package we can use the following command:
sudo apt-get remove openocdUninstall openocd And Its Dependencies
To uninstall openocd and its dependencies that are no longer needed by Kali Linux, we can use the command below:
sudo apt-get -y autoremove openocdRemove openocd Configurations and Data
To remove openocd configuration and data from Kali Linux we can use the following command:
sudo apt-get -y purge openocdRemove openocd configuration, data, and all of its dependencies
We can use the following command to remove openocd configurations, data and all of its dependencies, we can use the following command:
sudo apt-get -y autoremove --purge openocdDependencies
openocd have the following dependencies:
References
Summary
In this tutorial we learn how to install openocd package on Kali Linux using different package management tools: apt, apt-get and aptitude.
