How To Install libpktriggercord0 on Ubuntu 22.04
Introduction
In this tutorial we learn how to install libpktriggercord0
on Ubuntu 22.04.
What is libpktriggercord0
libpktriggercord0 is:
This package contains a library to control Pentax cameras in MSC mode.A
After one connects the camera to the PC with the USB cable, one can control the camera from the computer. One can read status information, one can change several settings, and one can take pictures. The pictures are stored in the camera’s buffer and can be downloaded to the PC. Pictures are not written on the SD card of the camera.
There are three methods to install libpktriggercord0
on Ubuntu 22.04. We can use apt-get
, apt
and aptitude
. In the following sections we will describe each method. You can choose one of them.
Install libpktriggercord0 Using apt-get
Update apt database with apt-get
using the following command.
sudo apt-get update
After updating apt database, We can install libpktriggercord0
using apt-get
by running the following command:
sudo apt-get -y install libpktriggercord0
Install libpktriggercord0 Using apt
Update apt database with apt
using the following command.
sudo apt update
After updating apt database, We can install libpktriggercord0
using apt
by running the following command:
sudo apt -y install libpktriggercord0
Install libpktriggercord0 Using aptitude
If you want to follow this method, you might need to install aptitude first since aptitude is usually not installed by default on Ubuntu. Update apt database with aptitude
using the following command.
sudo aptitude update
After updating apt database, We can install libpktriggercord0
using aptitude
by running the following command:
sudo aptitude -y install libpktriggercord0
How To Uninstall libpktriggercord0 on Ubuntu 22.04
To uninstall only the libpktriggercord0
package we can use the following command:
sudo apt-get remove libpktriggercord0
Uninstall libpktriggercord0 And Its Dependencies
To uninstall libpktriggercord0
and its dependencies that are no longer needed by Ubuntu 22.04, we can use the command below:
sudo apt-get -y autoremove libpktriggercord0
Remove libpktriggercord0 Configurations and Data
To remove libpktriggercord0
configuration and data from Ubuntu 22.04 we can use the following command:
sudo apt-get -y purge libpktriggercord0
Remove libpktriggercord0 configuration, data, and all of its dependencies
We can use the following command to remove libpktriggercord0
configurations, data and all of its dependencies, we can use the following command:
sudo apt-get -y autoremove --purge libpktriggercord0
References
Summary
In this tutorial we learn how to install libpktriggercord0
package on Ubuntu 22.04 using different package management tools: apt
, apt-get
and aptitude
.